USB Script Files | |
Download Link | Description |
USB Script files | Targeted Models : "VO8154AAD/VO8156AAD" Follow step by step this procedure to correct Side Tone issue on GUARDIAN SHOW Products (Avoid constant noise when side tone level 1 is active). - Unzip and Copy the provided file (fix_sidetone_gshow.rep1) onto the root of the USB key, (the file must not be in a folder and no other files or folders must be on the USB key - Once the USB key is ready, insert it into the dedicated USB port, located on the left side of the configurator - Once the USB key is connected, the configurator shows the following message: “USB drive detected and ready to use”. If the USB key is empty or involves wrong files, the configurator shows the following message: “Update file missing from the USB key” - Launch a quick configuration. - The configurator shows the following message “Quick settings from USB thumb”. - Then click on the Go button. The configurator shows the following message “Start the setting of the device?”. - Validate. - Wait few seconds, the configurator shows the following message “Quick settings from USB thumb completed”. - All the terminals in charger are now updated with the right parameters - Launch again a "classic" Quick Configuration with GUARDIANS SHOW Terminals |